Product ID:SAVIN PRISM I FUSER OIL, 8233
MSDS Date:09/15/1989
FSC:6850
NIIN:00N043548
MSDS Number: BRSHW

Emergency Phone: 404-448-9799

Info Phone: 404-448-9799

Cage: CLRCS

Telephone: 203-967-5000

Cage: 29382

DIMETHYL POLYSILOXANE

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE CONTACT:TRANSIENT WEAK IRRITATION.
SKIN CONTACT:NON-IRRITANT. INHAL:ESSENTIALLY NON-TOXIC.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:SKIN:REMOVE LIQUID FROM SKIN W/A DRY TOWEL & WASH EXPOSED
AREA W/DETERGENT. EYES:IMMEDIATELY FLUSH W/WATER FOR AT LEAST 15
MINS. INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE OXYGEN/
ARTIFICIAL R ESPIRATION). CALL MD . INGEST:CALL MD IMMEDIATELY .

Flash Point:>399F,>204C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICALS OR FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:THIS MATERIAL HAS NO UNUSUAL FIRE OR
EXPLOSION HAZARDS.

Spill Release Procedures:USE ABSORBENT MATERIAL TO COLLECT & CONTAIN
THE FLUID FOR SALVAGE OR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NO SPECIAL STORAGE REQUIREMENTS ARE
NEEDED FOR SAFETY REASONS.
Other Precautions:UNDER NORMAL INTENDED USE, NO SPECIAL HANDLING,
PROTECTIVE CLOTHING NOR SPECIAL EQUIPMENT ARE REQUIRED.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:NONE SPECIFIED BY MANUFACTURER.
Eye Protection:CHEMICAL SAFETY GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Spec Gravity:0.97-0.98
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS, TRANSPARENT, ODORLESS FLUID.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:SIO, CO2 & TRACES OF INCOMPLETELY
BURNED CARBON PRODUCTS.

Waste Disposal Methods:INCINERATE IN COMPLIANCE W/FEDERAL, STATE &
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.